Speaker Baffle Template

[Adam9 37]

As I've been unable to find this anywhere else I've created a printable template for cutting your own front door speaker baffles.

The preferable way to do this is to print the PDF with no scaling, it should print to the correct dimensions on A4 but check the measurement guides against a ruler before you start work to make sure they are correct. The guides should be accurate to within less than 1mm, if they are out then the template has been scaled by your printer or application and you need to try again.

The second option is to use the attached PNG file and insert it into a document yourself in something like word or publisher and play around with scaling until it prints perfectly (you will probably waste a lot of paper). You will need margins set very small to fit this on the page at full size.

I haven't tested these myself yet but I have sized them against existing adaptors and they look perfect. I don't believe the GT86/BRZ needs the outer corner thickness reducing so the baffles can be a single thickness with a hole in the centre. 

For the last time:

DO NOT waste time and materials cutting against this template if the scales don't match perfectly against a ruler or tape measure etc.

If you've stumbled in here searching for baffles for a different  model of Toyota then these might do the trick as well, this layout is used in multiple models.

PDF File:

Toyota-Speaker-Baffle.pdf

PNG File:

[WonkyJon 8]

Thanks for creating and sharing this chap. I'm just getting started on the audio in mine and stuff like this is very helpful indeed!

[Adam9 37]

No worries, let us know how you get on!

[Sean-A 8]

Could put these onto the CNC machine at work and get a few made.