Kodename47 446 Report post Posted May 30, 2017 2 hours ago, Lauren said: Kev found me some PFC's for £50 for the fronts, but the rears are £129, so not keen on that. They are different compounds anyway. There are no Z rated rear PFC pads. Share this post Link to post Share on other sites
Rich 378 Report post Posted May 31, 2017 I'm happy with my Z rated fronts, no idea on what to get for the rears, maybe Stoptechs as a quiet option. Share this post Link to post Share on other sites
Kodename47 446 Report post Posted May 31, 2017 4 hours ago, Rich said: I'm happy with my Z rated fronts, no idea on what to get for the rears, maybe Stoptechs as a quiet option. I have Cosworth pads as a match to mine. Can't yet comment on wear etc though but they were picked as a good match to the PFC Z fronts Share this post Link to post Share on other sites
Rich 378 Report post Posted May 31, 2017 I have Cosworth pads in the rear. The squeal and they're wearing quickly. Loads of dust too. Share this post Link to post Share on other sites
TTR 509 Report post Posted May 31, 2017 By the way, if anyone was wondering what alignment setup I'm on. Here it is: Front -2.4° Camber -0.05 Toe 5.5° Caster Rear -2° Camber 0.05 Toe 1 Deacon reacted to this Share this post Link to post Share on other sites
Ade 517 Report post Posted May 31, 2017 By the way, if anyone was wondering what alignment setup I'm on. Here it is: Front -2.4° Camber -0.05 Toe 5.5° Caster Rear -2° Camber 0.05 Toe Looks familiar 😉 Sent from my SM-G935F using Tapatalk Share this post Link to post Share on other sites
TTR 509 Report post Posted June 10, 2017 So, little update. Car is currently being E-mapped by @Fensport and it feels the absolute dogs bollocks so far. Proper throttle response and a punchy midrange! Still wavering on the idea of a BBK or not, @Adehas been kind enough to let me have his used Clubracer/HC800 pads to try out for Anglesey. Will likely make my decision after then Also a quick wash for PistonHeads Sunday Service! 3 Deacon, Ade and Ztox reacted to this Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 Medium ish update, I guess I picked up some JDM points on the wheel front with these Work Meister S1's Will stick them on the car for a little bit and then sell them on to a friend. 3 Lauren, Ade and Deacon reacted to this Share this post Link to post Share on other sites
Deacon 1357 Report post Posted June 13, 2017 Just now, TTR said: Medium ish update, I guess I picked up some JDM points on the wheel front with these Work Meister S1's Will stick them on the car for a little bit and then sell them on to a friend. Nice 👍 What size, etc? Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 2 minutes ago, Deacon said: Nice 👍 What size, etc? 18x8.5 ET32 Fair bit less aggressive than my current wheels 1 Deacon reacted to this Share this post Link to post Share on other sites
Deacon 1357 Report post Posted June 13, 2017 22 minutes ago, TTR said: 18x8.5 ET32 Fair bit less aggressive than my current wheels When they going on? Nice colour. Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 17 minutes ago, Deacon said: When they going on? Nice colour. Hopefully tomorrow! 1 Deacon reacted to this Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 So whilst I have the Meisters on I'll be getting my CR Ultimate's refurbished. Question is do I go Bronze or Gunmetal? Leaning towards Bronze at the moment, but I guess it makes finding a BBK with colours that don't clash a bit difficult. Just stuck the Meisters on for a quick preview: Share this post Link to post Share on other sites
Tareim 343 Report post Posted June 13, 2017 needs to be gold or bronze on a red car 1 TTR reacted to this Share this post Link to post Share on other sites
jimmyjimmyjimmy_ 32 Report post Posted June 13, 2017 So whilst I have the Meisters on I'll be getting my CR Ultimate's refurbished. Question is do I go Bronze or Gunmetal? Leaning towards Bronze at the moment, but I guess it makes finding a BBK with colours that don't clash a bit difficult. Just stuck the Meisters on for a quick preview: Looks awesome in black, I'd love Meisters on mine 1 TTR reacted to this Share this post Link to post Share on other sites
will300 812 Report post Posted June 13, 2017 The CR's need to be Bronze or White. Equally the Meisters need to be white ideally as well, they don't scream "awesomeness" in black. 1 TTR reacted to this Share this post Link to post Share on other sites
Lauren 2259 Report post Posted June 13, 2017 I think a polished lip is the way to go with these, then do the centres a different colour. 1 TTR reacted to this Share this post Link to post Share on other sites
Nimz 70 Report post Posted June 13, 2017 Major wheel envy. Where did you manage to pick those Meisters up? 1 TTR reacted to this Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 24 minutes ago, Nimz said: Major wheel envy. Where did you manage to pick those Meisters up? Picked them up off of the UK wheels for Facebook group. £3k brand new, got them for £1300 and they'd been used for 50 miles And cheers dude! I have a Gentlemans agreement to sell them to a friend after mine are sorted, should look awesome on his white BRZ! Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 39 minutes ago, will300 said: The CR's need to be Bronze or White. Equally the Meisters need to be white ideally as well, they don't scream "awesomeness" in black. 36 minutes ago, Lauren said: I think a polished lip is the way to go with these, then do the centres a different colour. Agreed, they're not loud enough for my tastes. But for the price I got them for I can't complain. Ideally I would've had a polished barrel with a matte gunmetal centre, but beggars can't be choosers and such! Share this post Link to post Share on other sites
Lauren 2259 Report post Posted June 13, 2017 Get them done, Tay it will be well worth it. Such a shame to take the detail out of them with them being black. Or just run them for a bit and sort them out later. For example; AE86 new suspension pre-geo old tyres by Lauren Blighton, on Flickr 1 TTR reacted to this Share this post Link to post Share on other sites
Deacon 1357 Report post Posted June 13, 2017 Clearly on my own but I love them in the black 👍 Share this post Link to post Share on other sites
TTR 509 Report post Posted June 13, 2017 20 minutes ago, Deacon said: Clearly on my own but I love them in the black 👍 I do too! But just love the two tone look! Severely tempted to order a set of CR 2P's, but I should really be saving for other bits on my list of mods! 1 Ztox reacted to this Share this post Link to post Share on other sites
jimmyjimmyjimmy_ 32 Report post Posted June 13, 2017 29 minutes ago, TTR said: I do too! But just love the two tone look! Severely tempted to order a set of CR 2P's, but I should really be saving for other bits on my list of mods! Matte black centres and gloss black lip? Share this post Link to post Share on other sites
TTR 509 Report post Posted June 14, 2017 10 hours ago, jimmyjimmyjimmy_ said: Matte black centres and gloss black lip? Yeah that's what the S1's currently are. But for the CR 2P this is what I'm after: Might buy both and run different colours until I decide which I prefer 2 Lauren and jimmyjimmyjimmy_ reacted to this Share this post Link to post Share on other sites