zhuonanli 14 Report post Posted July 5, 2017 As a lot of you may know, my car suffers from bumper gap under the headlight. It is so irritating,,, So I found this on the USA forum. http://www.ft86speedfactory.com/move-over-racing-bumper-quick-release-kit-black-anodized-2075.html#.WVyv14TyuM8 What are your thoughts? Group Buy of metal clips from Japan 1. rob275 . 2. Deacon . 3. Knightryder 4. zhuonanli . 5. Mike . 6. AJ124 . 7. Rich . 8. DanJ . 9. Ade . 10. Keethos 11. Cerastes 12. Hubertk 13. GT86-Ian 14. billdingo . Share this post Link to post Share on other sites
Kodename47 446 Report post Posted July 5, 2017 You can buy the OEM parts required for quite cheap, just get them replaced and bumper refitted..... unless you like the quick release look. Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 5, 2017 1 hour ago, knightryder said: You can buy the OEM parts required for quite cheap, just get them replaced and bumper refitted..... unless you like the quick release look. Not convinced seeing as it's my clips on the bumper that are seemingly the issue Share this post Link to post Share on other sites
Kodename47 446 Report post Posted July 5, 2017 4 minutes ago, rob275 said: Not convinced seeing as it's my clips on the bumper that are seemingly the issue From what I've read there are 2 hangers under the headlights that can cause droop even if the bumper is removed once, can't find the part number off hand though. The riveted part that the side indicators attach can also be replaced. The verdict seems to be that replace those 4 parts and it should hang correctly again. Although Subaru bumpers have a habit of doing this..... Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 5, 2017 @knightryder Possibly, my plastic clips on the bumper which clip on to the hanger seem to be slightly split, presumably due to stress from pulling it on and off making them not so tight. I could be wrong, i'd be keen to know the part numbers and give it a go as it'd certainly be cheaper than a new bumper! Share this post Link to post Share on other sites
Kodename47 446 Report post Posted July 5, 2017 Right Clip: SU00301496Left Clip: SU00301497 Those are revised parts so probably better than our early model type. Some good info here: http://www.ft86club.com/forums/showthread.php?t=12659 1 GT86-Ian reacted to this Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 6, 2017 Reading that thread the following part seems to have a 100% success rate https://www.japanparts.com/parts/detail/49087 May go ahead and get new brackets and the above from Japan Parts if the Toyo parts are cheap enough. Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 6, 2017 22 minutes ago, rob275 said: Reading that thread the following part seems to have a 100% success rate https://www.japanparts.com/parts/detail/49087 May go ahead and get new brackets and the above from Japan Parts if the Toyo parts are cheap enough. @zhuonanli or anyone else for that matter let me know if you wanted to try the part also. Shipment will likely be the same price for 4-5 sets of them. Share this post Link to post Share on other sites
Deacon 1357 Report post Posted July 6, 2017 14 minutes ago, rob275 said: @zhuonanli or anyone else for that matter let me know if you wanted to try the part also. Shipment will likely be the same price for 4-5 sets of them. I'd have a set @rob275 Share this post Link to post Share on other sites
Kodename47 446 Report post Posted July 6, 2017 For that price it would be rude not to I guess.... The under headlight support is around $20 per side from US suppliers so I would hope less than £40 for both from a UK dealer. Share this post Link to post Share on other sites
zhuonanli 14 Report post Posted July 6, 2017 1 hour ago, rob275 said: @zhuonanli or anyone else for that matter let me know if you wanted to try the part also. Shipment will likely be the same price for 4-5 sets of them. yeah mate i will definitely give it a try, Got any ideas how many set we need? coz i think there are a few clips for the bumper? Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 6, 2017 18 minutes ago, zhuonanli said: yeah mate i will definitely give it a try, Got any ideas how many set we need? coz i think there are a few clips for the bumper? Just 1 set, it's one clip for each bumper. You glue it to the front most clip where it sags. If you want more though just let me know. Share this post Link to post Share on other sites
zhuonanli 14 Report post Posted July 6, 2017 9 minutes ago, rob275 said: Just 1 set, it's one clip for each bumper. You glue it to the front most clip where it sags. If you want more though just let me know. yeah i will have one mate Share this post Link to post Share on other sites
Mike 458 Report post Posted July 6, 2017 I'll take one as well for that price. Share this post Link to post Share on other sites
AJ124 118 Report post Posted July 6, 2017 @rob275 If your happy to order a set for me that would be great. Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 6, 2017 Proving rather popular! Will get a list going. Will let you know how much it will be. Can't see it being anymore than £15ish each. 1. rob275 2. Deacon 3. Knightryder 4. zhuonanli 5. Mike 6. AJ124 Share this post Link to post Share on other sites
Rich 378 Report post Posted July 6, 2017 I'll grab one, just in case. Share this post Link to post Share on other sites
DanJ 374 Report post Posted July 6, 2017 Count me in as well please. The bumper will need to come off again at some point! Share this post Link to post Share on other sites
Ade 517 Report post Posted July 6, 2017 Count me in for a set too please Share this post Link to post Share on other sites
Minion 132 Report post Posted July 6, 2017 How hard are these to put on? My bumper sags a tiny bit but never had it off Share this post Link to post Share on other sites
Keethos 842 Report post Posted July 7, 2017 Me too please Sent from my EDI-AL10 using Tapatalk Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 7, 2017 17 hours ago, Minion said: How hard are these to put on? My bumper sags a tiny bit but never had it off They literally glue/bolt on to the underside of the already there plastic slip to reinforce it. 1. rob275 2. Deacon 3. Knightryder 4. zhuonanli 5. Mike 6. AJ124 7. Rich 8. DanJ 9. Ade 10. Keethos 1 Ade reacted to this Share this post Link to post Share on other sites
Cerastes 204 Report post Posted July 7, 2017 Everyone is getting one? I feel like I'm missing out. Do I need one Share this post Link to post Share on other sites
Devo 7 Report post Posted July 7, 2017 I will have a set if everyone is getting one. Share this post Link to post Share on other sites
GT86-Ian 351 Report post Posted July 7, 2017 Add me to the list please Rob. Share this post Link to post Share on other sites
