Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 02/29/20 in Posts

  1. 4 points
    will300

    Will300's Subaru BRZ Build

    Here's a video from Bedford:
  2. 3 points
    will300

    Will300's Subaru BRZ Build

    Update 21/02/2020 - Bedford Autodrome Trackday Myself and several other members of the 86 drivers club recently attended an MSV trackday at Bedford Autodrome, this would be my 2nd trackday of 2020. I was looking forward to getting back on track again, especially at Bedford. Whilst some people see it as bland, I really enjoy it and think it has good mix of charactistics from long straights, tight corners and sweeping bends, making it a good circuit for a medium powered car like the 86/BRZ. Plus with it being the UK longest circuit, you normally get plenty of track time without too much hold up. The day started out well, with me having some fun chasing down a Honda S2000, unfortunately he got black flagged, I'm not sure what for as he was driving well. Knowing Bedford I suspect it was noise limit, anyway I carried on for a couple more laps. I was probably pushing abit harder than I should have been this early on (making mistakes basically). The second session, I ended up behind a very dirty diesel VW Golf 🤢, unfortunately whilst chasing him down on the inner circuit straight (not sure what the actual name is) my engine management light came on. The car felt fine and had been performing perfectly fine up to this point. I drove back to the pits and into our garage where I turned the car off and left it for a minute before restarting it, unfortunately the light stayed on. Thankfully a fellow 86 owner, Michael Chan came to my rescue and lent me his diagnostic code reader, we read the code and found a P0351 error, Ignition Coil A. Knowing that this was a common occurance for older 86's, we cleared the code and restarted the car and the engine light was gone, happy days or so I thought. Session 3, I went back on track and ended up behind @VAD17, I had some fun for a couple of laps keeping up with him. It's surprising how well matched we are around a lap of Bedford, he's abit quicker on the straights than me thanks to his TD Turbo kit, but I end up catching him in the corners. It was going well until the dreaded engine management light came back on. So I pulled back in the pits and read the error again, it was the same P0351 code. Session 4, my final session of the day, I was less aggressive on the car by shifting at 6K RPM (thanks to @Lauren for the suggestion) rather than the 7.5K RPM rev limit. I did try and keep up with Michael Chan in his 86 for a lap or two, before the power deficit came into play. In the end I managed about 5 laps in this session before the EML popped up on the dash. By this point I'd had enough for the day and decided just to park the car and get a couple of passenger laps in. The drive back home was completely trouble free, and I've used the car for a week going to work without an EML. Thankfully I'd already booked the car into Rogue Motorsport in March for a pre Spa-Francorchamp checkup. I'll get them to swap out the dodgy coilpack for another one with some added heat reflective tape. Hopefully this will stop the issue from happening in the future. I've also ordered a Carista OBD2 dongle, so I can clear any error codes in future. Here's a couple of pictures from the day (basically the same photo repeated 😄 )
  3. 1 point
    will300

    Will300's Subaru BRZ Build

    Another video from Donington Park, this is made up of footage from several sessions throughout the day:
×