Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 07/15/20 in all areas

  1. 2 points
    MartinT

    MartinT's BRZ

    I've just checked with Abbey Motorsport that they are go for tomorrow's Rogue EL manifold install and tune. They had a scare with their dyno yesterday and it looked at one point that I might have to cancel. I hope I won't miss the UEL Subie rumble too much, but the EL should give me great performance. It looks the part, too. Most importantly, no heat up into the engine bay.
  2. 2 points
    It certainly does, not many green ones about. Ive never seen a Porsche RS green one. Here is the photoshop I created which covers my plans for the BRZ based off a yellow STI from Japan, lets see how close I get to it: Untitled by James Baker, on Flickr Still a long way to go, it certainly wont remain stock for long, plenty of parts ready to go on it one rebuilt. So pleased with the colour it came out perfect and gives me a matching pair with my Mini. JUNE 2019 R53 by James Baker, on Flickr Here are some pics from the body shop while they were polishing it. Untitled by James Baker, on Flickr Dropped off today by transporter: Untitled by James Baker, on Flickr Untitled by James Baker, on Flickr The rebuild begins: Untitled by James Baker, on Flickr
  3. 1 point
    I'm awaiting admission to the facebook group - I didn't even realise it existed!
  4. 1 point
    MartinT

    Help with wheel offsets

    The +35 offset will give you more clearance, not less. Sent from my LG-G7 using Tapatalk
  5. 1 point
    Lauren

    Help with wheel offsets

    Seriously go with the Reyland AP 4 pot kit with their discs and save some money over the AP discs. It's more than up to the job whatever you throw at it. Mine fit under my 17x8 ET38 TE37's, with loads of clearance.
  6. 1 point
    Kono

    Help with wheel offsets

    I think as long as your going for 18's there shouldn't really be a issue. Ap's own site states they are designed for 18" wheels (provided your going for the 6 pot). Not sure about how the ET or width would effect it but if its only a 7.5" you could always get some extra clearance with spacers ¯\_(ツ)_/¯
  7. 1 point
    will300

    Will300's Subaru BRZ Build

    Update 11/07/2020 - Blyton Park Trackday - Video #3 After posting the track battles footage on youtube, the Lotus Exige owner commented on the video and informed me that he had footage of when I was infront of him for a couple of laps, here is his video. It's nice to get a different persective of my driving.
  8. 1 point
    Rich196

    Stoptechs vs AP racing 4 pot BBKs

    A church said, you do not require to change suspension to use a BBK however, if with you current choice of tyres you can lock the wheels its pointless fitting a BBK. If however your using stickier rubber and you cannot lock the brakes with them then a BBK will give you increased performance. For reference have the Rayland 330mm kit: http://www.reyland.co.uk/subaru-impreza/ It fits under my Rota Boost, 17x17.5 E48 with a 15mm spacer. It also fits under my XXR 527 18x8.75 E35.
  9. 1 point
    Kono

    Help with wheel offsets

    Don't know why no one has recommended this so far but this is by far the best tool I've ever seen to help explain ET, size etc. Pretty accurate too! http://ft86motorsports.com/wheelitfit/ Just bang in what you want and see what it looks like compared to the standard set up. Also nice choice of wheels I'm looking into getting some DR10 work wheels 18x8.5 et32. Gunna be super close and might need a bit of adjustment but they look so sweet. The most unspoken thing I notice, since everyone points out 'poking out', no one seems to mention if you have too wide wheels with a high ET your wheels will catch your suspension. A friend of mine had a insane amount of jap wheels lying round and we where trying some on my car, he had some green D9R 18 x 10.5 et 48 and they couldn't even touch the studs because they hit the shockies about 2 inches before the start of the thread >.<
  10. 1 point
    Deacon

    Help with wheel offsets

    These are 17x7.5" et35
  11. 1 point
    will300

    Help with wheel offsets

    I was just looking at Work wheels as an alternatively for you, as they make the T5R which is the same style as the Advan TC4. You can get the works from Driftworks. I'd speak to them and see if they do them in custom offsets as the standard ones listed are very weak. https://www.driftworks.com/work-wheels-emotion-t5r.html
×