Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 08/09/20 in Posts

  1. 1 point
    Samwise

    Bringing an 86 back from the dead

    So another small update this weekend! Hopefully they're not too-spammy, i get a bit worried about posting too many pictures but I guess more is always better! So this weekend I went about doing some much needed maintenance on the car, mostly in the form of Oil changes for the engine, gearbox and rear diff as the car has just ticked over 50k Miles but also installing some supporting mods for the gearbox in the form of a gearbox mount bushing insert as well as the MTec Shifter spring kit which helps to centre up the gear stick when dropping back or passing through neutral. I started off with the oils as of course that was a fairly easy task all round, even with access to empty and fill up the gearbox and diff oil it wasn't too bad as there's quite a bit of room to get the oil bottle up high for the oil to drain out. For anyone following a long at home i believe the gearbox takes 2.2L of Oil whereas the Diff takes 1.1, in my case i used 75w-90 and always be sure to use new crush washers! (Copper for the engine, Ali for the gearbox/diff) to avoid any leaks. Curiously the diff's sump plug is magnetic from the factory which is a nice feature but the same can't be said for the gearbox. I then went about installing the diff pushing insert which again was a very easy job - Undo 1 nut, jack up the gear box, push the insert in and you're done! In my case it seems it is very much needed as the gearbox mount looks to have started to crack and even warp at the front. I don't particularly abuse my car but perhaps it moves around too much from the factory and doing the drift day last May or the odd wet-B road peel caused it to rattle around too much. Hopefully the diff bushing helps to avoid any further damage to it! It's hard to see the damage in this picture but if you've seen a non-buggered one you'll know that mine looks a little worse for wear. The next day I moved on to the Mtec Shifter spring install as I figured that would be the hardest bit, it wasn't easy that's for sure but not particularly taxing either simply just slow due to the access to the two bolts that need to be taken out there's little more than an allen key can get in one side and it's best to take your time in general as the aluminium threads of the bolts can easily cross thread or strip if you don't clean the old thread locker from them. Once the two Ali plugs were removed and the old springs retrieved they could be swapped for the new springs and tightened back in. Not many pictures as it's such a tiny viewing window im afraid but i covered it all in my latest video here: The weekend after that I went over to Chelmsford to attend the SlammedUK meet which was a pretty good turnout, the closest thing we've had to a proper car show all year it feels like. I got chatting to alot of new people or people that follow me in various forms and the 86 got alot of great attention all round! Here's a few little pics from various photographers on the day: @Ryanhudsonphotography @all.kinds.of.cars @Sammjoey
×