Leaderboard

Today I decided to try to improve my bonnet, which is full of stone chip repairs with ill-matching paint and also suffered from an accident with a paint spillage. I clay barred a long curved mark on the bonnet with the recommended clay and clay lube. Then I used the orange buffer with my orbital machine and Meguire's paint compound, being careful to apply it exactly as in the video. I then used isopropyl alcohol to clean and check the area. I repeated this, then cleaned and polished the area. No sign of the mark, just a nice and evenly shiny area of the bonnet. This may seem like amateur hour to some of you but for me it was a big deal. It's given me the confidence to do some more areas tomorrow.

There are 2 motors attached to the side of the heater system behind the front dash fascia. If you remove the glove box u can see the bottom motor. Its black with a large white cog on the side. If thats the one u should be able to remove and replace without removing the dashboard. If its the top motor then it is a dash out job. see the attached post to put the system into test mode: Climate control error codes - GT86/BRZ General Chat - Toyota GT86 and Subaru BRZ Drivers Club