CGR Automotive

We've currently got some in-stock systems, more info on the following thread;

We could do a sports cat mounted on a V-band so you could swap in/swap out a sports cat really easily with a single socket in about 5 minutes on your drive

We do high-end custom exhausts to suit whatever needs you have, how much power the car's running and other mods would mainly determine O.D of the tube we use but silencer choice would be down to personal preference on how you want the system to sound. There's a thread on our development system here; Give us a shout if you have anymore questions

Yes we could cater for quad tailpipes for the TRD bumper, we'd probably have to get the car in to check exits of the dimensions e.t.c if that's ok but it's not a big job to switch the tailpipes, would you just want straight cut dull-polished pipes like our other systems?

Yep! If anyone is interested in reading a review of the system please take a look at this

Hi everyone, the video is here! Our microphone didn't pick up the sound as well as we hoped, so the video is quite quiet and doesn't really do it justice. Apologies for this and I hope it's still useful to you. The lead time is approximately 4 weeks at the moment @will300 With regards to the tailpipes, we don't tend to stock them as we make them custom to order. But we really can create whatever you like to suit your needs. The ones on the demo system are dull polished straight cut stainless 5" tips. If anyone wants to discuss with us what they're looking for we'll let you know if there will be any additional cost or not

We need to come up with an accurate RRP but we need a car here first to be certain. We're willing to do a very good deal with manifolds and a remap for the first customer! We're based in South Yorkshire if you live anywhere near and could pop in sometime? No worries if not we'll do our best to arrange a price asap.

Hi Guys, We hope to be developing manifolds very soon! As with the exhaust, we will need a demo car to be left with us for a short while. If you're interested please let us know Thanks, CGR Automotive

Very glad you're happy with it we were VERY happy with the outcome, car sounded great!

Hi Kieron, We'll be completing our GT86/BRZ development exhaust next week and could offer a system with a centre silencer mounted on a set of v-bands which would take 5 minutes to swap. Means you can go out on a weekend with a louder system than through the week and it would be a dead easy job to swap them over

Thanks Rob but unfortunately we're in the same boat where we wouldn't modify anybody elses stuff that's fauly, we could build you a fresh manifold though if you're interested

Posted this up earlier but realise it may get more traffic through this part of the forum; Looking for someone who's flexible and after a discounted exhaust system for us to build a development product on, there's more details her http://www.gt86.org.uk/forums/topic/3816-development-car-wanted/ Cheers! CGR

I see, not a problem just let us know if you fancy a change!

Ahh that's a shame, doesn't seem like there's many local to use nevermind ones that aren't daily driven

Nope no word from him as of yet, how far is nowhere near? We've had people drive from all over the place in the past but I understand it's quite an inconvenience especially as we'd need the car for a little while.

Hi guys, We're still after a development car for our first exhaust system. We've got all the parts in and ready to go to build it we just need a willing victim to let us have a play with one. System will be built to your spec as requested, quiet or as loud as you'd like with any style of tips e.t.c Take a look at our facebook and instagram for pictures of other bits and bobs we've been doing Facebook Instagram Cheers

Hi guys, Does anyone know "Kaz" off the forum personally. He's due to have a custom exhaust fitted and a remap done this week and dropping his car off today but his phone's been going to answer machine all weekend. #1 just want to make sure he's ok as it seems odd his phone's been off all weekend. Guessing there's something up #2 if he can't make it this week it's not a problem but it's a weeks worth of work we've got to rearrange and sort out so could just do with knowing whether he can still make it or not. Just want to clarify we're not annoyed or anything we just want to make sure he's ok and rearrange stuff if we need to Cheers guys

Just to be clear the two rear boxes are technically resonators, we just call them silencers as we only build highly effective straight through resonated silencers. Fingers crossed we'll have the system fitted to the car in the next few weeks or so and will try both set-ups with 2 and 3 silencers, there's always scope to make them bigger and smaller depending on customer needs so there'll definitely be an option for everyone

This will be a louder option however we build all our own silencers so they're very well packed and suppress quite a lot of noise for how compact they are, there's plenty of room to fit another silencer in the centre-pipe if that's what some customers would rather go for. I'll get a video of one of the 370Z systems we do which had basically 4 boxes of similar size to the ones pictured and was spot on for what the customer wanted, not too loud at all with minimal cabin noise when cruising but gave a noise but not too loud when opened up, there was plenty of room to still make it louder and that's a 320bhp 3.7litre V6. We'll be offering various options to cater for different noise levels too so we can make them to your exact specifications

Well the CAD is done, first system is going to be built in the next few weeks and on the car ASAP will keep the thread(s) updated

No idea what happened there guys sorry! I've edited the link now

I would depend on the spec of the system i.e what size silencers and tailpipes e.t.c you'd like but we could probably do a system for around the £500-£550 mark

Hi Everyone! We’re looking for a car to develop our high quality exhaust system on, in exchange for a reduced price system. We should only need the car for a few days, however it is best if the person can be flexible as it possibly may need to be with us Monday – Friday. We already have the under floor of a BRZ as a CAD file from laser scanning and the CAD for the system itself is under-way! All of our work is focused on quality and we hope to provide one of you with an exceptional exhaust system. Below are a some photos from our previous work, and to see the kind of group buy service we offer here is a link to a current offer on our Megane exhausts http://www.performance-exhausts.co.uk/news/megane-225-230-r26-3-inch-exhaust-system Although we cannot confirm prices as of yet, it will most likely be somewhere near the price of the Megane system. We can tailor all of our exhausts to suit your needs, whether its silencer options or custom tailpipes. Drop us a message if you’d like to get involved, any questions please ask away! We're based in Hellaby near Rotherham South Yorkshire, Just off the M18 between the A1 and M1. https://www.facebook.com/cgrautomotive/ http://www.cgrautomotive.co.uk/ info@cgrautomotive.co.uk Cheers

Feel free to pop round anyways, I'm not sure we could give you any business unfortunately but we always have open doors for people to come see what's happening and how we do things

Hi Guys, Just a quick post to introduce ourselves! We’re CGR Automotive and we think of ourselves as a “one stop shop” for your performance tuning needs. We're based in Hellaby near Rotherham South Yorkshire, Just off the M18 between the A1 and M1. We design and manufacture a huge range of parts and products, from batch production to custom pieces. Our history has been mainly to cater for the motorsport market and high-end sports cars. Although we specialise in exhaust systems, we can manufacture intercoolers, radiators, suspension components, roll cages, pretty much anything! We also have a dyno and offer standalone ECU tuning alongside OEM remapping too. By using extensive CAD design and Laser Scanning in-house, we CAD model all our products up first to ensure a perfect design and fit every time. We'll be posting up some separate threads on various bits and bobs we're working on, dyno days, and looking for some cars to help with our development work, so keep your eyes peeled! Cheers https://www.facebook.com/cgrautomotive/ http://www.cgrautomotive.co.uk/