Devo

Will take them at asking price, could collect asap.

I should have a set front and back in my shed but will be bare mudflaps with no bolts. Make me an offer if interested

http://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=273532390811&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111 One listed on ebay atm, has some damage but if you are respraying then should be fine.

Hi, Wondering if anyone had any experience shipping and importing parts from US and what are the best and cheapest ways of doing so. I am interested in STI replica lip kit by Bayson R which is priced around $270. Seems to have great reviews all over ft86 forum and the fitment is suppose to be spot on. If anyone wants to arrange a group buy and sort out logistics then that would be amazing.

I found that only plastic welding works well for these type of parts. You can use a cheap 40v soldering iron to melt the plastics and grab some scrap pp

Good luck buying a replacement as I have never bought replacement part that didnt really need respray. These parts come off salvage cars and the cars are not the most looked after around yards with forklifts. Its also hard to ship door if you are not willing to collect so most likely one corner will be bend/dented. I am not sure who people are using on resprays as my bodyshop in Poland that charges me around £70-100 a panel never had problem matching and blending any pear white. (GT86 & 370z repaired in last couple years.) The only time the colour wont match is if the painter is blind or just spraying based on colour code and not matching the shade. That kind of painter I would try to avoid by all means...

Had my first GT86 at 19yrs old and with 1ncb the insurance was almost the same as my 1.2tdi Ibiza (900 a year). I had few cars in between and now own a BRZ and currently pay around 450 for whole year at 22yrs. The insurance on these car is actually quite cheap, the main trick is to shop around.

http://www.carolescraftsuk.co.uk/product-p/490926.htm Watch this and it won't be perfect but a lot better. To make it perfect it would be a respray job.

http://www.halfords.com/motoring/paints-body-repair/scratch-repair-paint-restorers/farecla-g3-permanent-scratch-remover-paste-150ml I can guarantee that this will sort out your problem. If I can't be bothered to get my DA polisher out on couple scratches I always use this. (2 second job) Edit/ I thought it was just scratches but on second look looks like the paint is gone in places.

I wouldn't expect a cheap fix if your aircon gas is the expensive version (R1234yf). The problem you will also find is that 99% of your local garages will not stock this gas and the lowest price I've seen a full regas on the R1234yf is around 200-300. I would establish what gas is used in your GT86 by popping the bonnet and next to the latch you will see aircon sticker which will tell you if you've got R1234yf(Expensive) or R134A(Normal/cheap)

Hz performance so far quoted me £339 for the whole kit delivered within UK. I think if we had at least 10 people I could easily negotiate 10-20% off.

It's not too bad but yes it's quite jerky at really low speeds first thing in the morning.

Currently talking to HZ Performance which seem to think that they might have the same bodykit in stock, just waiting for confirmation and detailed photos. The HT Autos has simillar front lip but the sides and rear are just simple plastic extension pieces that bolt under the car. I like the other kit because it slight goes over the cars body making it almost a bodykit not just little extension pieces. Anyone up for group buy?

Hi, Selling a set of Genuine Brand NEW Project MU RSR01A Rear Pads for GT86/BRZ. Rear brake pads developed especially for 86/BRZ one-make racing using road-registered vehicles. Although 86s and BRZs may pass road-worthiness inspections, the load on the brakes in one-make racing conditions is greater than that of racing cars. This is an ultra-high-spec model brake pad packed with technology and expertise forged in top racing categories worldwide. Material Super graphite metallic Applicable Rotor Temperature 200～800℃ Friction Coefficient 0.45～0.58μ Retail around £150-200. SOLD

Thanks for the offer but little bit too far for me.

Looking for two 215 45 17 tyres and some decent front pads. Will consider anything if someone wants to clear some space.

I am after a complete set of standard shocks and springs for a reasonable price. Just wondering if anyone wants to free up some space

I had to order mine used from USA as the price for just the complete unit here was around 800-900 at dealership for one headlight. I managed to source a used complete headlight for around £260 using global shipping on eBay.com. The light pattern in USA is flat so it will still pass MOT. Only one other option would be to buy an aftermarket set of headlights from fensport for around 450. Then I would probably sell the other Brz headlight on eBay.

I will have a set if everyone is getting one.

Been having some trouble with my 2013 BRZ. It started to make clunking noise coming from the front wheels. It seems to be getting worse and I have no idea on how to fix this but it's driving me insane. [youtube]gjMAXM_Yl6M[/youtube] https://www.youtube.com/embed/gjMAXM_Yl6M I've got hsd coilovers and they seems to be in good condition.

I am not sure as I bought the car few months and the HSD were fitted, I haven't got any proof of purchase so I guess I will have to pay the full price for the shock. Not really too impressed with HSD if I am honest, they looked pretty much brand new when I got the car so can't imagine them being too old. Not really sure how long coilovers usually last but I never had to replace stock shocks after few thousand miles.

I've adjusted the droplinks checked all the bolts were tight and then decided to give up on trying to fix this my self. Dropped it off at local Subaru specialist and he seems to think that it's the shock absorber, I guess I just need to find out if I can buy replacement shock on driftworks. Thanks everyone for input

I could source full JBL kit from a 2013 Gt86 but would take couple weeks. It would be around £500.

This is the headlight washer cap and Toyota will supply the part painted in the colour of your car if you give them your vin. The part delivered cost me around £50-£60 each when I replaced mine. (Expensive for tiny little bit of plastic) However I found it impossible to find it on ebay so dealership was the only option.

how much for blue cover?