Lauren

Ah, brilliant. :+: Yes and do tell us more about the promo.

Nooo! Sorry, not my thing at all. I didn't like them in 2002 when they were all the rage and I'm still no fan now. Basically it's a hinge meachanism that attaches to the door. No idea if it's any more complicated than that though.

LOL, Rob. This is my old 'training' route I used to use when I lived in Macc and I was racing. I tended to use the route a lot in the winter on weekdays when it was quiet. It's worth noting it's an anti-clockwise route that starts in Macc and follows the A523 and then uphill on the A54 from Bosley. Then along the top and down the Cat and Fiddle A537. The reason for this is that the A54 is getting on for downright dangerous on the downhill and the Cat and Fiddle is much more fun on the downhill IMO. The A523 is just a bridging road really a bit like the A5 part of the EVO triangle.

It got a lot louder when I got the decat. Performance wise I think the decat gave the biggest increase. Yes, it's worth the money I think!If you're going to do it, you might as well do it properly...

Yay, posting from work it was the 'www' bit by the looks of it!

When I'm at work I can't post on the forum. Trouble is I can't clear caches because I don't have permissions. Any idea when it might be fixed.

A sound generator allows some induction noise to be piped to your cabin. Open your bonnet and have a look. It's entirely up to you what you go for in temrs of induction. You can drop a filter in or change the induction box, lots of options. Some are more money than others. Do they do much, in terms of power? Well I doubt it in all honesty. Mine is supposed to make 12bhp. Yeah, right!

Welcome, Tom, hope you find it useful over here. :+:

Yes it can be fitted without the remap. Mine isn't remapped after all. I had it fitted by my dealer (RRG Macc) before I picked it up. Yes, it bolts on and off, no problem. Very easy to swop it back to stock. The induction kit allows a bit more induction noise. Apparently it gives power gains too. Hard to say on that one really.Gets rid of the sound generator too.

That's a really good idea. :+:

Also 'headers' mean manifold as in exhaust manifold.

Welcome aboard, good to have you. :+:Jim, yes, know what you mean, this is why I went for the Milltek. I later went back and got the decat pipe fitted with overpipe at my first service.

Yeah, practice and keep at it. It does take a while to get the hang of it. As I said, probably three months at it to get proficient enough. The issue is of course if you do it whilst going into a corner and slip off the brake then you could have an accident so practice in a straight line to begin with without traffic anywhere near you. Very happy to show you if you pop over for a meet. :+:

Okay will try it. I have cleared all the cookies, everything, made no difference. I'll try a www. if it's not there already. Mark mentioned something about it may be an IP issue with the forum settings.

James, I wouldn't say I was a pro. I did race professionally in 2004, though that was a long time ago! I have also done trackdays amongst other things for 12 years now. On the GT86, James, I don't think you need to change the pedals, they are fine. Yes the brake pedal is a little high I agree, though it's not so much of an issue when you are braking hard.It's something you have to practice really and every car is a bit different. It is certainly possible to heel and toe and do it well on the GT, but you may neeed to tweek how you have your foot. I favour the ball of my foot on the brake pedal and blip the accelerator pedal with the side of my foot.If you want some decent footwear, Puma Speedcats are great, I've used them for 12 years now and wear them everyday for driving to work. About £65 I think, easy to find, just google for them.If you're at a meet I'd be happy to show you how. Not sure where you are, but looks like I'll be down to London/Kent in a couple of weeks. Reckon it takes about three months to get up to scratch with heel and toeing.

Happy Birthday, Gregg. :+:

Tis a very good price for all that lot ot be fair. :+:

The brake pads squeak. Nothing you can do about it realistically. It's the pad material.In terms of heel and toeing, here is an article I wrote some ten years ago:When driving on-track and equally on the road there are always tips and tricks you can learn. Often mentioned but not always well understood is that of heel and toeing. Before I explain what it is I am going to mention the benefits and the reasons behind it. This technique is aimed at kemoothest possible transition from braking before the corner onto corner entry. It’s main aim is to help maintain the balance of the car whilst simultaneously allowing maximum braking.What heel and toeing is, is essentially a ‘blip’ of the throttle to match engine revs whilst changing down a gear and braking. All at the same time of course! Sounds difficult, but with a bit of practice, not only do you get round corners more quickly, but you are also much kinder to your car’s gearbox, clutch and engine.Probably the easiest way to explain it is to take you through a virtual corner. So here I am approaching Redgate at Donington. I’m in 4th gear at around 105mph or so. To take the corner I need to reduce my speed to 60mph and be in 3rd gear. I am still accelerating as I am approaching the corner. At the braking point I put the brakes on very hard to slow down in as short a time as possible. Now, timing is key to doing this well. As my speed drops just below 75mph I push the clutch down and change into 3rd. before I let the clutch up, I roll my right foot (which is still on the brake) and turn it slightly anti-clockwise to ‘blip’ the throttle. This sends the engine revs up and as I let the clutch out the engine speed matches the road speed in that gear. Next I turn-in to the corner and get back on the power easing the throttle on to balance the car for the exit of the corner. Two main advantages here; firstly the car hasn’t been unbalanced by me changing gear and braking. Secondly the net result is that I’m on the power earlier and everything is that much smoother.So what happens if I don’t heel and toe? Well I enter the braking zone, brake hard, then as the speed drops I change down and as I let the clutch up the engine revs suddenly soar, which in turn unbalances the car as the rear goes light and I have to deal with all this before I turn into the corner! A year ago at Bentwaters I experimented with not heel and toeing at a tight left hand corner. It was a second gear corner and I found that if I didn’t heel and toe I actually locked the rear wheels as the clutch came up! So in effect when you heel and toe you are pressing the brake and accelerator at the same time. This is the trickiest bit by far, how to maintain consistent even braking and in the middle of it blip the throttle? As I described earlier, I like to roll the outside of my right foot onto the throttle. This is certainly the way to do it with the most feel. But if you have standard pedals then you may find they are too far apart to do this easily. I have a Sparco pedal set in my car for good reason and that is to put the accelerator and brake closer together so that I can roll my (narrow) feet more easily. If I’m driving a friend’s car I use the ‘other’ way. Literally use the ball of your feet to press the brake and kick the accelerator with your heel. It’s less easy to keep a constant pressure on the brake doing it this way, but it gives the same results as rolling your foot. It may be less exact but it works just as well.One of the best things about heel and toeing is that you can practice it every time you drive your car on the road. Please remember though that the first few times you try it make sure no-one is in front of you. Try it at slow speeds on a quiet road. Cruise along in 4th then try the technique going into 3rd. Better still simply sit in your car and look at your right foot on the brake pedal see how you can push the brake and hit the throttle as you do it. Make sure that your foot is in no danger of slipping off the brake. I was practising this a few years ago and tried it approaching a roundabout. I wasn’t going overly fast but my foot slipped right off the brake and I had to get on the brakes pretty quick to stop in time! So be careful!Lastly, in order to help heel and toeing, think about getting a pedal set. You can buy a funky Sparco Aluminium set for under £20. Make sure it is a ‘bolt on’ set and not one that clamps over the existing pedals. What you need to do is to take the rubbers off the brake and clutch and drill through the remaining metal pedal. Then it’s a matter of bolting the pedal cover to the pedal. Make sure that the brake pedal cover is absolutely secure. You don’t want this to come loose! By law there is supposed to be 50mm between the brake and accelerator. It’s very much up to you if you keep to this. You’re unlikely to get prosecuted if they are closer than this distance and you would be pretty unlucky to fail an MOT because of it. To heel and toe well and to drive well, you need to have the maximum feel through the pedals as possible. A lot of people drive in trainers and while this may be comfortable, because of the thickness of the sole it literally robs you of feel and feedback through the pedals. Okay the clutch isn’t all that important but the accelerator and brake certainly are. Try to wear as thin soled shoes as possible. Best is of course racing boots as they are designed solely for this purpose.. They do cost, but in my opinion they are worth it. Expect to pay around £30 or so for ‘clubman style boots’. FIA approved nomex boots start around £60 plus.Hope this helps! (copyrighted 2003).http://www.mr2.net/trackdayqueen/heelandtoe.htm

No trackday cover will pay out for the other car if you have a car on car collision. Cars hitting each other is so rare that I'd wonder if it's really worth worrying about. (interesting forum problem, I went to change 'is' to 'are'. But I cannot do it, despite the cursor being in the right place, when I backspace, it's at the end of my sentence).

Insurance didn't claim the money off the guy in the end. They also encouraged TDO's to add an additional disclaimer to help stop this happening again.

Wow, impressive! Might show the dirt a bit.

Great to meet you, Jim and yes, I had forgotten you had those tyres in the back, I'll bet they were flying around. Twas a really nice meet and always good to have blat up to the Cat. :)If there's another one of these I'll go for a camera install. :+:

Ah, Mark, you so should have done. Was hoping to catch up with you guys, but my beauty sleep and the need for a big brekkie (oatcakes no less!) meant I didn't get there until after you'd gone. Was a great day to be out, have a bit of a blast in places, just enjoying the car then a onto a nice little natter at the Cat & Fiddle. Not a bad Sunday.

Ah, thanks for that, it's always nice to be noticed! Pity you were low on fuel, our destination was a loop up the A54 Bosley to the top and then down the Cat and Fiddle. Great day for it!