tegunulgener

From distance...

All in place...

And with the clear resin It doesn't look like a light safer tho. Camera cannot see better...

Led is on its place

Waiting for the silicone to dry...

Also put a silicon to make waterproof the cables and connections to prevent being corroded

Grooved the foam for led and cable passed through...

Back to work... Sorry for the long delay everyone. I was not well. Still not perfect but getting there... Anyway, i cut the expanding foam. And sanded

it sounds like old car stereos interfering with speakers and spark plugs... but very quiet. Whine kicks in after 5000rpm and meanwhile you feeling the boost and the torque on your chest... It gives the chills. Really!!! And gives a great grin to the face and when you look around, you are alone because they are so small in the mirror... Happiness is loneliness!

My condolences...

Mine are; Stoptech pads all over and Stoptech rotors at front. A Much better stopping alas no SQUEAKING! whatsoever Thanks Mark@Abbey

Expanding foam is indeed expanding lol Good thing, in a day or two, it will go hard and be able to sand and paint.

Best shot I can get...

Behind the resin... I assure you that it is indeed very red. Sorry for the camera. It balances the white point and neutralises the red tone to orange. Try to get a better colour...

It is indeed bright

5050 red led arrived meanwhile...

Decided to go with expanding foam. Covered the gap and this is going to be a good support.

for fitting, top of the dials must come off because of the sensor must be under the wind shield. So it can find the satellite signals. It is 2 screws only. The rest, nothing really important. All the sockets can fit on one place so no mess up on that part. module just sits under the head unit with 2 or 4 screws and 1 socket (i think it was only 1 socket) software must be updated to use the features of touch and go. i was quoted about £120 (might be £200 cannot remember) direct swap is much easier and fitting just the module is extra 4 screws and a socket or 2. so nothing really difficult on that. just must be careful while taking of the plastic trim on dash board as they are indeed very expensive if they break.

guys IMPORTANT ! ! ! you can use the module. it is plug and (not) play. it fits and connects however, you have to take the car to toyota and they can reprogram the software so it can only work this way. how do I know? i bought a second hand unit. (because of the same reason, i swapped the units) What I suggest you is; exchange head units. this is the only way to make it work. PS: dealer charges around £120 to £200 (confirm with your dealer)

Me likes!

Thank you Keith for your birthday and keeping us gathering. It was really great to see everyone. For a change, I didn't travel the way in 4 hours. Traffic was OK. Lol yesterday wasn't. On both directions, nearly 4 hours. It would be disaster with my little Melisa.

It's been postponed. Usual nhs

I was unique with blondy lol

Yep... Lol

Cool... See you soon