Fensport
-
Content Count
152 -
Joined
-
Last visited
Everything posted by Fensport
-
Seriously though, Nigel it will be great to get another GT86 out there and we can join forces to beat those pesky 4wd cars Cheers Adrian
-
Lol see 1st rule of racing above Regards Adrian
-
We did it so you could run either gearbox lol .... first rule of racing .... use any means to win !!!
-
Hi Tim, yes 1000Nm ..... should be enough for the rear tyres Regards Adrian
-
Nigel, have a look at pic 3, you can see we extend the strengthening plates further back, that's so we can make a pair of mounts to bolt in and take the standard gear box. You never know a race series may rule out a sequential box or we may want to sell the car or something. It's not for sale by the way Regards Adrian
-
Thanks Mark It uses an adaptor plate to fit the standard manual bell housing and clutch mechanism and yes input shaft is standard spline so any clutch / flywheel combo can be used We're using the extreme 230mm twin which is plenty strong enough! Cheers Adrian
-
Lol this is a *nice* kind of whine
-
Hi all, here's some install pics from our car It's a relatively easy install, remove the standard g/box mounting bridge and make own mounts along with a modified prop and linkage. It is LOUD very LOUD and not a mod for road cars Here's a video in action https://youtu.be/WNYrtiYfDNk
-
James, sorry about that, human error! Please remind us on your next order and we will credit you the difference.
-
Glad its going well Keith .... enjoy but be careful!! Remember 4th gear is the direct 1 to 1 drive now for dyno on Monday and make sure the vvt is switched and the air temps are good ! There's way more to come from the engine yet, we're only scratching the surface so we'll see you on Friday, for the Stoptechs, as long as Mr Customs is nice to us Cheers Adrian
-
No worries on the maps guys, working closely with Cosworth I will just be a "map logger" for the day and and simply send them logs to fine tune We already have a base map to suit the Avo exhaust Not long now Mike Cheers Adrian
-
As a result of this thread and many other enquiries over the last few days, we are about to place an air freight order with Blitz Japan for the 55703 Suction Kits. I fully expect them to be with us in around a fortnight's time. http://www.blitz-uk.co.uk/ProductItem-4254.aspx I'm not sure if the Advance Power induction owners have seen this video showing an independent test of the kit: www.youtube.com/watch?v=x0OQRnGlQlE
-
Hi Geoff, Just been speaking to Tim about this and we have tried to call you back but no answer ..... basically you must have a spigot ring stuck on your hub flange as Jamie has said, all GT86 are 56.1 so if the Eibach spacer is measuring that then it will fit ... we close at 1 today but advise you double check before sending them back Cheers Adrian
-
Yes these will still be the same price. The rear tail lights are not so bad with a reasonable minimum order quantity for us, these are also currently in stock.
-
We have just enquired about some more of the smoked reverse lights and have been hit with a minimum order quantity of 20! We are willing to stock 10 on the shelf but would need 10 pending orders to enable us to order the 20 in. If we can get 10 people interested in them then we will proceed to ordering. Other than that, I'm afraid we cannot justify purchasing 20 of these for stock!
-
Nice and accurate write up Lauren I have one too, completed 4,000 miles and its used as a general workhorse / family car, tows the trailer very well too Mind you my one has black leather, I couldn't stomach the beige! 1 massive improvement we have made is an addition of a tuning box which takes power to 190bhp and torque to just over 300 lb ft. I must say it really brings the Rav4 alive and it actually needs it's 4wd system on the exit of greasy roundabouts which adds to the fun I must time it 0-60 and see .... Cheers Adrian
-
Hi Bles, At the moment we are on a 3 week backlog for turbo fitting, stage 2 takes 3 - 4 days. Yes you can fit the exhaust now if your thinking of 2.5" system? The airbox can also be fitted at any time with a stock ecu, it will run a little leaner than stock, 11.8 instead of 10.8 which will net 5-8 bhp too Cheers Adrian
-
Hi Guys just tidied up this thread, any Avo questions please fire away New stock is due in a week or so and we'll get some pics up of the new kits available Cheers Adrian
- 35 replies
-
- 1
-
-
- Fensport
- Turbo GT86
- (and 6 more)
-
Hi Stan, an easy question ..... to ask lol We haven't tested the stage 4 yet and the first 2 cars have forged engines but I reckon it would see over 420bhp on a stock engine on road fuel. Race fuel you could get over 500 easily and maybe much more ......... as to how long it would last ? The weakest link is the rod so you have to be careful of cylinder pressures! so yes upgrading the internals is a must for longevity Best Regards Adrian
- 35 replies
-
- 1
-
-
- Fensport
- Turbo GT86
- (and 6 more)
-
lol ..... some say ..... my body too!! yes Thailand is the manufacturing plant Airbox is separate, we kept it this way so people can decide on their own modification route Your No 1 for stage 4 Nige :)
-
Hi Ian, We have a resonated version on the next shipment due mid Feb Cheers Adrian
-
Hey Nigel, pull your finger out and get the body sorted Turbo will be leaving oz end of next week Best Regards Adrian
- 35 replies
-
- 1
-
-
- Fensport
- Turbo GT86
- (and 6 more)
-
Hi Guys, We noticed that there doesn't seem to be much available in regards to an alternative solution to the standard GT86 headlights. Styling wise, every other panel and fixing seems to be available here in the UK except for the headlights! After a bit of research we have sourced, tried and tested these lights from TopSage. TopSage have been a supplier of ours for a while and as you probably already know, we stock a lot of their interior and exterior carbon parts already. These lights are E-marked, come with built in LED indicators and daylight running lights. The 4 available styles are; Chrome http://www.fensport.co.uk/Parts/Model_108/Category_13/5021 --- Chrome w/o LED ring http://www.fensport.co.uk/Parts/Model_108/Category_13/5018 --- Black http://www.fensport.co.uk/Parts/Model_108/Category_13/5020 --- Black Chrome http://www.fensport.co.uk/Parts/Model_108/Category_13/5019 --- For more photos visit the links above Club Prices Chrome without LED ring - £452.52 inc. VAT All other styles with LED ring - £463.32 inc. VAT + Delivery. With a set of these costing a lot less than the standard lights from Toyota and looking a lot more slick, it's a no brainer! Cheers! Dan sales@fensport.co.uk
-
The club price still stands at £250 inc VAT and delivery for all lights except the smoked ones. These are £280 inc. VAT and delivery.
-
These are HID ready. You remove the HID bulb, ballast and leveling motor from your standard light and fit them straight on to these ones. They come with instructions on how to do this As soon as you plug the lights in using the main plug, all lights including the indicators will work. This is because the BRZ has indicators built in to the headlight casing as standard and obviously it's all the same wiring!
