Deacon

Welcome on board. My experience with the GT1's would suggest there are much better places for your money. The Meister customer service was bang on though - got all my money back on them.

Welcome on board! I'm Midlands based too - on the West Mids / South Staffs border - whereabouts are you? Me and @will300 arrange regularish Midlands breakfast and lunch meets.

Mapping was done by TD

It's a Verus rear diffuser and it attaches to the chassis at the arb mounts as well as to riv nuts in the sides of the rear bumper and to brackets that attach to the bottom edge of the fake oem diffuser

Stoptech Centric rear discs also arrived today from @James@Amber ready for a pre trackday brake refresh with the front discs and pads I picked up before:-

Picked up some of this to try as I've heard good things and Eurocarparts had a good offer on:-

Mine

As @GravelRash said I have Batman badges replacing the Toyota emblems. They don't sit on top of the Toyota emblems though they replace them (I've never seen any that sit on top of the oem ones to be honest). I ordered mine from Pete Thompson who's in the US and custom makes any design you want by hand. @faith and @Mark-in-Stoke also have ones from Pete Thompson too. You can contact him though Facebook or Instagram and he can make anything you want. Hope that helps but any questions please ask 👍

Agreed!

It's fine either way. I kept mine on and had no problems but you're never going to feel a couple of hp

They've removed the full sound generator piping and the little box goes on the bottom of the intake pipe. Mishimoto provide a bung so you can run the box or not. The mishimoto instructions suggest it's worth a couple of hp to keep the box in.

I definitely think @will300 and @Keethos should have done a challenge. The way they dispatched that tables worth of meet I think they'd have done it easily! 😂

Out of interest what are you swapping to @AJ124?

Cracking photos @will300 Good to see everyone today and I really enjoyed my burger! 🍔😘

Sorry only just seen this. Honest answer is I have no idea - maybe give them a call?

NA Sent from my ONEPLUS A3003 using Tapatalk

Lots of people seem to have struggled with the Berk. Maybe they've updated the cat blocks Sent from my ONEPLUS A3003 using Tapatalk

You've done well to pass with the Berk

Rogue Motorsport

Have a look here:-

Bolts are stainless steel but I've been told they should be OK with the titanium nuts. If it does seem corrosion's a problem I'll swap to titanium bolts too

Verus supply some black painted steel nuts for the splitter end plates but do say they may rust. They certainly do in the UK, becoming one rusty boi quite quickly So I ordered some titanium replacements as, due to their location, they can end up 'sat' in water so I'm hoping the extra corrosion resistance of titanium will keep them looking decent

Standard pressures

From the North your nearest 86 specialist is probably Tuning Developments then. You may want to also look into some kind of underbody rust prevention too if your plan is to keep the car longterm

There are several specialists around the country - where abouts are you?