Gregski

anybody knows if this is still for sale? ddn't get any answer from Ben yet.

Shipping to Glasgow area and your PayPal please - if it's still for sale. Cheers, Greg.

Re: Irp quick shifter v3, had it on my previous gt86 as a road car. Positives: 1. Shifting is amazing, it is sitting next to steering wheel, so you can get faster shifts (hand does not need to travel so far). 2. The shifter travel from 1st to 2nd and so on is shorter than oem, at least that is the impression I had. 3. Looks nice when you spend the time to get everytnihg in place, almost like oem finish. Negatives: 1. It gets all the noises from the gearbox to the cabin, so forget about listening to classical music. There is no suspension between the gearbox and the shifter, no rubbers, etc. So you will get more noise with acceleration 2. If you want to at least get some noise away, be prepared to test and try few improvements over the irp design (using foam or rubber or anything to quiet down the noise and hum). 3. Irp is know to have a ratlle and I had that as well, especially when hitting higher rpms, also can be resolved. There was a long discussion about it on US owners club forum. https://www.ft86club.com/forums/showthread.php?t=126464 4. Price / improvement of drive and time spent on shifting? In the end it is a good product for track use. I have owned IRP shifter but now I would try the CAE shifter. Just my opinion.

Looking for a oem spoiler from facelift gt86 / brz. Colour does not matter. Thanks.

I have bought this, so I think the sale thread can be closed now.

Hi again, I was a bit too optimistic about that clips. I have a oem set of indicators, that came off my BRZ, but the previous owner had them fitted with silicone glue so the A Clip is missing. So apologies - but I won't be able to help you. But I found that : https://led86.com.au/product/replacement-side-indicator-clips Don't know if its too much or not, but they sell them abroad.

Hi, I may have one or two. I will check it tonight, will let you know. Greg.

hi Leonard, Greg here, so 1. My headlights look diffrent then yours, I attached a generic google photo with exaclty the same face as mine. The DRLs are under lights , indicators are built into headlights so I did not touch it. Looks like each country and each model differ with the setups. 2. I have no front fog lights, I fitted a switch that you can see on the photo - its for a rear fog light , but like I mentioned before, the jdm oem bunper fog light had no space for a bulb to be fitted, so I have changed that to valenti v bar. So again - each country has its own unique designs for this car.

You are not the only one with right hand indicator switch. I have a JDM brz. And my fog light switch was retrofitted. Mind you, rear bumper light had no space for the bulb, so I fitted valenti bar.

I will grab the spoiler please, can you send me your paypal?

Hi , would you be able to post it to Glasgow? regards Greg.

That AC delete - when did you buy the kit? Because the website says out of stock. Or do I need to place an order with them? In my case - I do not use ac at all, so want to get rid of the gear in the engine bay as well. and the raceseng kit is no longer made.

I was also wondering if I could get a second one. Mine is a bit different since I have changed my 86 to JDM brz. And it came with only one like this on the photo.

If I cover the cost of shipping will you be able to post it to Glasgow UK?

Lovely car, I myself got rid of UK gt86 (enjoyed it very much), and got myself JDM brz. Two different cars in my opinion. In few weeks I'm going to do the full exhaust and your setup is exactly what I am after. Hence my question: is it easy to live with it every day? Or is it too noisy? Could you please describe your experience with it? Do you still have catalytic converter? Best regards, Greg.

Hi, Sorry, forgot to update. These are sold.

For sale brand new, still sealed Mtec shifter springs. 25 + delivery. Glasgow and areas - free to pick up. Cheers, Greg.

Not sure if East Kilbride is on your way, but have 2 sets, both from 2013 models.

Hi Buddy, Just a quick question, I may have missed that during my reading : is this a hks single exhaust you are currently running? If yes - is it quite loud? My idea was to fit it to a daily car, NA.

Got one set from gt86, will have another one from brz, both 2013, removed due to fitting blitz advanced power intake. Not sure about the price, let me know what do you think. And needs to be posted, I'm in Scotland. Greg.

I will grab the tail lights please, PayPal?

Looking for a set of oem underbody / under engine and gearbox / panels. One is metal, the other plastic. Let me know if you have anything like that. Cheers, Greg.

@Twigman get a set of cheap tyres (from Asia /China/ for example). They cost 30quid per whell, and you are sorted for happy tail wagging :) At least thats what I did and it worked great.

Hi just a quick question: how did you get around MOT with this setup? I am asking regarding the missing airbag. Cheers.

Hi guys, I am in the process of installing the Spa gauge in my car too. Which of the block8head did you order? and how much was it? If I remember the spa gauge is 52mm? Do I need to specify the size during ordering?