Carbon Ninja

I would personally stay with the GT86, i made the mistake to change to 350z. Still fun and balanced but the GT86 have more useable fun in day to day drive. Feedback amazing and feel me with confidence in most places I go. It is a car that I feel it challenge me to push it just a bit harder to go that little bit quicker everytime. Sent from my Nexus 6 using Tapatalk

Sorry my apologies.. no need for gasket because the joint is a tappered join with the spring clamp standard so it is self sealing. Sent from my Nexus 6 using Tapatalk

It is almost time for me to say fairwell to the GT86 as she due to go back to the dealer. She will be sadly missed. Therefore in the next month (Sept) I will need to take some parts off the car and they will become redundant. I will have the Quicksilver Exhaust and the 17" Fondmetal 9RR lightweight alloywheel for sale. Quicksilver exhaust £350 collection in Bedford You can see the clip here (This is actually my car). It is not over the top loud and infact very deep tone. During cruising the noise is civil and the car does come alive particularly in the mid range and the top. Fondmetal 9RR 17" x 7 Alloywheel £350 collection in Bedford. These are not cheap or your usual low quality wheel. They are heat treated to T6 condition (which will be better for durability and fatigue resistance) As non heat treated wheel of the same design will means the life expectancy will be alot less (cracks). These wheels are same OE width but 2mm greater offset. Doesn't sound alot but the improvement is apparent in cornering (a little less tail happy) I deliberately choose this offset with OE tyres without ruining the fun factor. They are also lighter compare to OE wheel (9.1kg) vs Fondmetal 9RR (7.45kg). There fore saving of 1.6kg per corner. Pickup improvement is apparent. Fondmetal information can be found here http://www.fondmetal.co.uk/en/alloy-wheels/9performance/9rr-nero More pictures as per request OE wheel information here http://www.gt86ownersclub.co.uk/forum/oem-aftermarket-wheel-tyre-specs-weights_topic2257.htm The wheels are in perfect condition except 1 which has a hair line scuff. I will take some more pictures tomorrow. For now I want to see if there are any interests. Here are picture I have for now more to add tomorrow. 我從使用 Tapatalk 的 Nexus 6 發送

Hi eddymon, will need one gasket. Sent from my Nexus 6 using Tapatalk

Wheels now sold! Exhaust is still available Sent from my Nexus 6 using Tapatalk

Sorry to bring back old thread. Parts must go. Wheels 350 and exhaust 350. Sent from my Nexus 6 using Tapatalk

DS2500 doesn't have the initial bite like others. However they are quite linear and ok for road. Once get up to temp the bite progress really apparent. 我從使用 Tapatalk 的 Nexus 6 發送

Open to sensible offers.. 我從使用 Tapatalk 的 Nexus 6 發送

Thanks Steve... Still up for grab... 我從使用 Tapatalk 的 Nexus 6 發送

Yes it is.. Sorry not been online for a while 我從使用 Tapatalk 的 Nexus 6 發送

Bump! Exhaust now removed from car and the wheels. More pictures added to the original post. 我從使用 Tapatalk 的 Nexus 6 發送

Ok added two more pictures. 我從使用 Tapatalk 的 Nexus 6 發送

Unfortunately photography ain't my profression... Lol I will try again with the phone once I get back and get some more pics. cheers for the tip. [emoji28] [emoji106] 我從使用 Tapatalk 的 Nexus 6 發送

Honestly I have no idea but I will give an attempt number 2 我從使用 Tapatalk 的 Nexus 6 發送

Bump wheel pictures added. 我從使用 Tapatalk 的 Nexus 6 發送

You have PM 我從使用 Tapatalk 的 Nexus 6 發送

May I ask the reason for selling? Also spring rate? 我從使用 Tapatalk 的 Nexus 6 發送

Hello all, Just joined the forum and come by to say hi.

Thanks for all the warm welcome . Yes it is 17 x7 et45. Even went for a set of standard tyres. My aim was to try to preserve OE handling parameters but only with minor track increment and reduction with rotational mass. After 2 days of driving so far, i can say the setup is pretty good not too grippy, more stable and a little quicker in pick up so very happy. Although it does look under wheeled. Suspension when you come to conclusion I like to know as well as I think it needs a good looked at before changing anyyhing ad the standard setup is very good

Thanks Jay

Hi all, I need to give it a wash before I even dare putting pictures ip lol. White GT86 with 17 in 9RR wheels, quick silver exhaust and hopefully soon HKS panel filter

Sorted

You got PM

Hi, do you still have this filter for sale? Im interested thanks